Product Description:

The MDD093C-N-060-N2L-110GB0 is a brushless AC servo motor manufactured by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Designed to operate with digital drive controllers, the unit converts regulated current into precise rotary motion for indexing tables, printing lines, and pick-and-place axes. It is intended for applications that require controlled acceleration, steady speed regulation, and accurate stopping. Its mechanical interface follows the standard series layout, which keeps mounting and wiring arrangements consistent in closed-loop automation systems. The brushless design avoids commutator wear, which supports reliable operation in machinery with frequent start-stop cycles.

Its centering flange measures 110 mm, providing accurate concentric location against machine housings and simplifying alignment during installation. The motor reaches a nominal speed of 6000 rpm, so the connected drive must support the higher operating speed of this rotor class. Power and feedback conductors exit on side B, and the factory-fitted connector simplifies cable attachment and service access. Position data are returned through digital servo feedback, allowing the controller to track motion precisely without an external encoder assembly. A plain shaft transmits torque directly to couplings or gears, and the shaft extension is provided only on the drive side. This arrangement helps keep the rear motor connection area organized when the machine layout requires directional cable routing.

The motor uses standard dynamic balancing to limit residual vibration, and the housing pattern matches common adapter plates used with this frame family. The C-length stator stack increases continuous power density without changing the front-end geometry, yet the unit is supplied without a blocking brake, so static holding torque must come from the drive or an external clamp. It also uses a shaft seal with the 093 frame size to help retain lubricants and reduce contaminant entry around the shaft area. The sealing arrangement supports cleaner operation where nearby machine components may expose the motor to dust or oil mist.