Product Description:

The MDD093C-N-040-N2M-130PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It works with digital drive controllers to deliver commanded torque and speed for positioning tables, packaging axes, and material-handling modules. This arrangement supports closed-loop motion control in equipment that must accelerate, decelerate, and hold position with repeatable accuracy. The motor uses the 093 frame size, follows standard balancing and housing dimensions for the series, and includes a blocking brake so loads can remain secured when power is removed.

During installation, a centering register of 130 mm locates the flange accurately on the machine face, and the rotor can operate continuously up to 4000 rpm for fast motion profiles. Cables exit on the left side, which suits layouts where the control cabinet is mounted on that side of the machine. Torque is transmitted through an output shaft with a keyway, while the internal brake provides 11 Nm of holding torque to keep the shaft still at standstill. The circular connector combines power, feedback, and brake leads in one plug, and the rotor is balanced to the standard grade to help limit vibration during operation.

Position data are supplied by an integrated multi-turn absolute encoder, and the signal is transmitted as Digital servo feedback (DSF) so the drive can close position and velocity loops without external converters. This feedback arrangement supports both speed regulation and precise axis positioning through the connected controller. The motor uses Motor Length Code C, which gives a longer stack length than the B version and supports higher continuous power within the same frame. A design with a shaft seal helps keep lubricants or process fluids out of the bearing chamber, and the shaft is supplied without a side B extension for inline couplings or gearboxes that load only one side of the rotor.