Product Description:

The MDD093C-N-040-N2M-130PL0 is an AC synchronous servo motor built by Bosch Rexroth Indramat for use with digital drive controllers in automated equipment lines. It converts controlled stator current into regulated rotary torque so positioning tables, handling axes, and light spindle applications can follow commanded motion profiles with high repeatability. The motor also supplies closed-loop feedback to the drive, which supports fast acceleration, stable speed control, and accurate stopping in packaging, pick-and-place, and similar automation systems.

Mechanical alignment uses a centering diameter of 130 mm, which provides an accurate locating surface when the housing is mounted to a machine plate. Cabling exits on the left side, leaving the opposite side more open for surrounding machine components and airflow. A single round connector carries power, grounding, and signal conductors through one connection point. Rotor position is monitored by an integrated multiturn absolute encoder, so the drive can retain position information after power is removed. Under rated voltage, the rotor can reach 4000 rpm, which suits high-speed indexing and conveyor duties. The 093 frame with C-length stator keeps inertia moderate and helps limit vibration during rapid reversals.

The motor is supplied without a blocking brake, so any application that requires holding torque at standstill must rely on drive current or an external holding device. Position and motion signals are transmitted through digital servo feedback (DSF), which gives the controller the data needed for precise position loops. Torque is delivered through a keyway shaft end, allowing secure coupling to pulleys, gears, or similar driven elements. The motor is built with a shaft seal, which helps reduce contaminant entry in light spray environments. The housing uses a standard finish, and the motor does not have a side-B shaft extension, which helps keep the overall length shorter in compact machine layouts.