Product Description:

The MDD093C-N-040-N2M-130PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into precise rotary motion for positioning axes in automated machinery and transfer lines. The closed-loop motor design lets the connected drive regulate position, speed, and torque with high repeatability during frequent start-stop operation. This operating behavior suits packaging, transfer, and assembly axes that must respond quickly to changing commands.

This model reaches a nominal speed of 4000 rpm, allowing rapid cycle execution in indexing tables and packaging equipment. A centering diameter of 130 mm aligns the stator housing accurately to machine flanges for consistent mounting. Position data comes from an integrated multi-turn absolute encoder, while velocity and commutation feedback are transmitted through Digital servo feedback (DSF) to the controller. Power and signal conductors exit on side A, which can simplify cable routing when drives are arranged in rows. The motor uses a size 093 housing with a keyway shaft, so torque is transferred through a positive mechanical connection.

A molded connector mates directly to the drive cable set and helps maintain shielding continuity. The frame corresponds to length code C, adding stack height for additional magnetic surface without altering the 093 cross-section. Motion is held solely by drive torque because the unit is shipped without a blocking brake, which reduces overall length when a holding function is not required. The motor is built with a shaft seal, which helps keep lubricant inside the bearing cavity when it operates in oily or dusty environments. A standard shaft end on the drive side and no secondary shaft on side B help keep the rotating assembly compact.