Product Description:

The MDD093C-N-040-N2M-130GR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it provides rotational power and position feedback for axes that require accurate speed regulation, indexing, or coordinated interpolation on automated production lines. The motor is suited for closed-loop motion tasks where repeatable response and stable control are required throughout continuous machine operation. It can be applied in packaging, transfer, and handling systems that depend on consistent servo performance over repeated cycles.

This model carries a nominal speed of 4000 rpm, allowing rapid cycle times in motion systems that need high shaft speed. A centering diameter of 130 mm helps align the motor with a matching machine flange, and standard dynamic balancing reduces vibration during operation. Power and feedback conductors exit on the right side, while the single-point connector keeps wiring organized and allows the cable set to be disconnected without opening the housing. Position data is provided by an integrated multi-turn absolute encoder, so the drive can track shaft position across multiple revolutions after power returns. This arrangement supports accurate startup behavior and reduces the need for separate position recovery steps during normal machine use.

Feedback is transmitted as digital servo feedback, which supports stable communication between the motor and a compatible controller. The motor uses length code C, which indicates the longer housing in this frame and supports higher continuous torque than shorter versions of the same size. A plain shaft is fitted, and the shaft seal helps keep coolant or lubricants from entering internal components during operation. The motor is supplied without a blocking brake, so any holding force at standstill must come from the drive or from an external mechanical device. Mechanical power is available only from the drive end because the shaft does not include a side B extension, which helps preserve a compact overall installation length.