Product Description:

The MDD093C-N-040-N2M-130GL1 is a synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical energy into controlled mechanical rotation for positioning tasks on packaging lines, handling systems, and general automation. Size code 093 and length code C indicate the frame envelope and active iron length. The standard housing and connector-based power interface support orderly machine integration without adding external motor accessories.

A centering flange with a diameter of 130 mm aligns the stator accurately on machine frames and helps keep runout within tolerance. Under rated electrical frequency, the rotor reaches a nominal speed of 4000 rpm, allowing rapid cycle times when paired with suitable gearing. An integrated multiturn absolute encoder retains position information across multiple revolutions, so the control system can recover axis location after a power interruption. The blocking brake supplies 11 Nm of static torque to hold vertical or suspended loads when the drive is disabled. For closed-loop operation, the motor uses digital servo feedback (DSF) to transmit position and velocity data for accurate regulation.

Power, feedback, and brake leads exit on the left side, which can simplify cable routing in machines that place moving components on the opposite side of the motor. A shaft seal sits behind the output end to help limit dust or coolant ingress into the bearing area during regular operation. The rotor assembly uses standard balancing, which supports smooth running across the speed range and helps protect connected couplings from unnecessary vibration. The output end is a plain shaft without a secondary shaft on side B, so the motor can connect directly to pulleys, couplings, or precision gearboxes in compact drive trains.