Product Description:

The MDD093C-N-040-N2M-110GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into accurate rotary motion for positioning and feed axes in industrial automation equipment. In closed-loop applications, it supports repeatable indexing, feed motion, and coordinated axis movement on machine tools, packaging systems, and transfer equipment. The housing keeps installation dimensions consistent across the series, and a single drive-side shaft end supports direct coupling to pulleys, couplings, or similar transmission components.

The motor has a nominal speed of 4000 rpm, which supports high-speed axis operation under rated conditions. Accurate alignment during mounting is supported by a flange recess diameter of 110 mm. Position information is provided by an integrated multi-turn absolute encoder, so the controller can track shaft location over multiple revolutions after startup. Electrical connections leave from the left side in a fixed direction, and all conductors terminate in one connector housing. That arrangement helps keep cable routing orderly where surrounding machine space is limited. Torque is transmitted through a plain shaft with a shaft seal, which helps limit contaminants from reaching internal components.

Rotor data is also available as digital servo feedback (DSF), allowing the drive to regulate torque and speed in real time. The motor uses a standard housing, which supports the usual mounting pattern for this frame. Its overall length is C, giving the stator a longer active section than shorter versions in the same size and supporting higher torque within the same frame family. The unit is supplied without a blocking brake, so any holding force at standstill must come from the drive or from external mechanical restraint. Because the brake is omitted, vertical or suspended loads need a separate holding method when power is removed. Standard balancing supports smooth rotation during normal operation and helps reduce vibration in precision axis service.