MDD093C-N-040-N2L-130PB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
4 Seconds
The Bosch Rexroth Indramat MDD093C-N-040-N2L-130PB2 is a motor for digital drive controllers in the MDD Synchronous Motors series. This model features a nominal speed of 4000 min⁻¹, a 130 mm centering diameter, and comes with digital servo feedback and a keyway shaft. The motor includes a blocking brake with a holding torque of 22 Nm and has a connector type connection on Side B.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-040-N2L-130PB2 is a synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into tightly regulated rotary motion for positioning, conveying, or tooling axes in automated machinery. The permanent-magnet rotor and built-in feedback enable closed-loop velocity and position control when paired with a matching drive, making the unit suitable for medium-inertia tasks that require repeatable acceleration and stable running speed.
It is balanced to a standard grade, so vibration transmitted to the machine frame remains within typical automation limits. A centering pilot of 130 mm simplifies concentric mounting and helps keep the stator air gap uniform. At its rated operating point, the shaft reaches a nominal speed of 4000 rpm, giving the drive a high operating speed for demanding cycles. The length code C provides additional stack height for higher torque without changing the frame diameter, and the housing uses the series' standard cooling surface design. An integrated blocking brake produces 22 Nm of holding torque to secure vertical or suspended loads when power is removed. Position information is returned through digital servo feedback (DSF), supporting high-resolution commutation. A contact seal is fitted at the output end, and the shaft seal helps prevent lubricant escape while protecting the interior against spray or dust.
Field wiring approaches the rear because the power and feedback connectors are oriented on side B, allowing cable runs to pass directly toward the cabinet. The unit is in the 93 mm frame class and uses motor size 093, which aligns with standard gearbox and flange dimensions for this envelope. Quick-disconnect service is provided by a circular connector that mates with preassembled cable sets. A keyed shaft provides positive mechanical locking to couplings, and the standard single-ended shaft arrangement saves space on compact drive stations.
Frequently Asked Questions about MDD093C-N-040-N2L-130PB2:
Q: Does the MDD093C-N-040-N2L-130PB2 motor include a holding brake?
A: The MDD093C-N-040-N2L-130PB2 motor comes with a blocking brake that features a holding brake torque of 22 Nm.
Q: What type of motor feedback is included with the MDD093C-N-040-N2L-130PB2?
A: This model provides digital servo feedback (DSF) for precise position control.
Q: What is the nominal speed of the MDD093C-N-040-N2L-130PB2 servo motor?
A: The nominal speed of this motor is rated at 4000 min⁻¹.
Q: What shaft configuration and sealing does the MDD093C-N-040-N2L-130PB2 use?
A: The MDD093C-N-040-N2L-130PB2 features a keyway shaft with a shaft seal for secure mechanical connection and protection.
Q: How is the electrical connection configured on the MDD093C-N-040-N2L-130PB2 motor?
A: The electrical connection is a side B connector, enabling straightforward installation.
