Product Description:

The MDD093C-N-040-N2L-130PA2 is a brushless servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded phase current into precise rotary motion for automated packaging, printing, and material-handling stations. Designed for closed-loop operation, the unit supports rapid acceleration profiles and high positional repeatability in industrial automation. Its brushless construction helps reduce wear associated with mechanical commutation, and it is suited for axes that must start, stop, and reverse frequently without losing control accuracy.

The centering collar measures 130 mm, giving a fixed reference that aligns the flange with connected machinery. At a nominal speed of 4000 rpm, the rotor can support fast duty cycles on high-response axes. A blocking brake rated at 22 Nm holds the load when the power stage is disabled. Position data are transmitted through digital servo feedback (DSF), allowing the drive to monitor speed and position continuously during operation. Mechanical output is delivered through a shaft with a keyway, which provides a positive connection for couplings and pulleys. Standard balancing helps limit vibration, and the motor housing uses an uncooled cast-aluminum design with a shaft seal to keep out dust and coolant.

Electrical interfacing is simplified by a sealed connector positioned on side A, so power and feedback cables exit toward the driven load and can be routed along the same machine face. The motor has a frame size of 093, and the motor length code C indicates a longer housing within this size range. There is no shaft extension on side B, which leaves the rear of the motor clear for installations that need space behind the housing. The cable exit location and housing proportions help the motor fit machines where mounting depth and routing space are limited.