Product Description:

The MDD093C-N-040-N2L-130PA0 is a three-phase permanent-magnet servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified for use with digital drive controllers, it converts commanded current into rotary motion for positioning axes and coordinated machine functions in industrial automation lines. Its permanent-magnet design supports fast torque response and stable closed-loop operation, making it suitable for applications that require accurate speed regulation and repeatable motion. The motor is built for integration into automated equipment where compact servo performance and consistent dynamic behavior are required.

With a nominal speed of 4000 rpm, the rotor can follow rapid command changes while maintaining synchronized operation. The centering diameter of 130 mm provides the locating fit that aligns the housing on machine frames and mounting surfaces. Power and feedback conductors exit on side A, which helps keep cable routing in a single direction inside the machine. Position data is returned through digital servo feedback (DSF), allowing the controller to maintain precise speed and position control. For applications that stop by drive torque alone, the motor is supplied without a blocking brake, which reduces mechanical complexity and removes brake-related wear.

Mechanical power is transmitted through a shaft with a keyway, allowing the motor to connect to standard hubs and couplings. Electrical connection is made through a circular connector, which keeps wiring compact and supports secure attachment of the cable set. The motor is equipped with a shaft seal, which helps retain lubricant in the bearing area and limits the entry of contaminants. The stator uses length code C, giving it a longer active section than shorter versions in the same frame size. Internally, the rotor uses standard balancing quality, and the housing follows the standard series profile with a single-ended shaft, so there is no shaft extension on side B.