Product Description:

The MDD093C-N-040-N2L-130GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for drive systems that use digital controllers, and its integrated blocking brake allows vertical or load-holding axes to remain locked when power is removed. The unit uses the C motor length housing and a standard enclosure, making it suitable for common mounting frames in packaging, material handling, and general automation. Its synchronous design also supports accurate torque and speed control during repeated starts, stops, and direction changes.

At a nominal speed of 4000 rpm, the rotor supports fast positioning cycles in pick-and-place modules and similar automated axes. When the machine stops, a blocking brake delivers 11 Nm of torque, which helps keep medium-inertia loads stationary during a power loss. Position data are returned through digital servo feedback, so the controller receives precise motor feedback without analog drift. A centering diameter of 130 mm aligns the motor accurately to the machine frame, which helps maintain proper mechanical fit. The motor uses a plain shaft, and power and feedback cables attach through a single interface to keep external connections compact.

The rotor uses standard balancing, which supports smooth operation without special correction parts. The frame size is 093, and the longer C-length housing provides additional active length within the same motor family. Cable routing is simplified by the right-side connection, which keeps the opposite side clearer for surrounding machine components and nearby hardware. A shaft seal protects the shaft opening from contaminants, and the motor has a single shaft end so couplings or pulleys mount only on the primary side. This arrangement is useful where the machine layout requires unobstructed access around the non-drive side of the motor.