Product Description:

The MDD093C-N-040-N2L-130GA2 belongs to the MDD Synchronous Motors series and is manufactured by Bosch Rexroth Indramat for use with digital drive controllers in industrial automation. As an AC servo motor, it converts regulated electrical power from the drive into controlled mechanical torque for coordinated motion on packaging lines, handling gantries, and similar equipment. This arrangement supports precise position and speed control during repetitive machine cycles where stable response and accurate axis movement are required. It is intended for closed-loop servo applications in which the motor and controller work together to maintain commanded motion under changing load conditions.

A centering diameter of 130 mm provides register fit at the mounting flange and helps maintain shaft alignment under load. Power and feedback conductors exit on Side A, which can simplify cable routing when the motor is installed deep inside a machine frame or beside guarding panels. The rotor reaches a nominal speed of 4000 rpm, allowing fast cycle operation in servo-driven axes. A blocking brake rated at 22 Nm holds the axis when power is removed, which is useful on vertical axes or indexing positions that must remain fixed at standstill. Position data is returned through digital servo feedback, allowing the controller to close the velocity and position loops directly. Standard dynamic balancing helps reduce vibration transfer to adjacent mechanical components during operation.

The motor uses length code C, indicating the assigned stator stack length for this housing. Frame size 093 gives the unit the matching mechanical envelope for common mounting arrangements and compatible couplings. A plain shaft provides a smooth output surface for shrink-fit or keyed hubs selected by the machine builder. The motor also includes a shaft seal to help limit the entry of contaminants and reduce lubricant migration toward internal components. The shaft end is supplied without a side B extension, which helps conserve axial space in compact machine layouts. A molded connector combines the phase, brake, and feedback connections in one plug for a clean external interface, and this arrangement keeps external wiring organized around the motor housing.