Product Description:

The MDD093C-N-040-N2L-110PL0 is a synchronous motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is supplied as a standard-balanced motor with a standard housing for direct use with digital drive controllers in automated machinery. In operation, the motor converts regulated drive current into precise rotary motion for indexing tables, packaging axes, and other cyclic equipment that benefits from fast speed regulation and integrated position feedback. This arrangement lets the connected controller manage acceleration, velocity, and stopping behavior with close coordination between the motor and feedback system.

The rotor is rated for a nominal speed of 4000 rpm, allowing the drive to reach high cycle rates while staying within the thermal limits of the stator windings. Mounting alignment is guided by a centering diameter of 110 mm, which fits the flange pattern used with the 093 frame. The mechanical envelope uses length code C, which marks the third longest stack in the family and supports higher continuous output than shorter versions. Overall frame designation 093 places the motor in the mid-size range of the series, balancing inertia and torque density for general automation tasks. Command and feedback signals use digital servo feedback, so the drive controller receives high-resolution rotor position data for accurate velocity and position control without separate external sensors.

Cables are routed to the connector set mounted on the left side of the stator housing, which can help when several axes are installed next to each other in a machine. A positive-fit shaft seal helps keep coolant spray and dust away from the interior bearings during operation. Because the unit is supplied without a blocking brake, static holding force must come from the drive or external mechanical devices when power is removed. Power transmission occurs through a keyed output shaft machined with a keyway, which provides a secure mechanical connection for pulleys, pinions, or clamping hubs.