Product Description:

The MDD093C-N-040-N2L-110PA0 is a servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. When paired with digital drive controllers, it delivers controlled torque and speed to automated machinery for precise motion in packaging lines, material-handling axes, and general factory automation. Its synchronous motor design supports accurate response to changing command values during closed-loop operation, which helps maintain stable motion during indexing, positioning, and speed control.

The motor reaches a nominal speed of 4000 rpm, allowing rapid cycle rates where fast indexing is required. A centering diameter of 110 mm matches standard mounting interfaces and helps keep alignment error low during installation. Length code C marks the third housing depth in this motor size, balancing rotor inertia with continuous power capability. Frame size 093 corresponds to the stator diameter used for compatible gearheads and machine mounts. Power and feedback leads exit on Side A, which keeps cable routing on one face of the machine. Standard balancing reduces residual vibration, and the connector-based connection type supports straightforward installation without hardwired leads.

The unit is supplied with a shaft seal to help limit the ingress of oil or coolant along the output journal. Its output shaft uses a keyway for positive torque transmission into couplings and driven components. The motor comes without a blocking brake, so any power-off holding function must be provided by an external brake or by drive-generated holding torque. Position information is returned through digital servo feedback (DSF), which supports high-resolution closed-loop control at the drive. Heat is removed by natural convection through the standard housing, and the shaft end uses the basic style without a side-B extension to keep the overall motor length shorter.