Product Description:

The MDD093C-N-040-N2L-110GA2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated AC from an inverter into precise rotary motion for automated machinery such as packaging stations, gantry axes, or tooling spindles. Pairing with a compatible drive on the same platform allows rapid torque response, electronic gearing, and coordinated multi-axis interpolation for modern industrial automation. This operating principle supports accurate contouring and repeatable motion in systems that require closed-loop positioning.

The motor reaches a nominal speed of 4000 rpm, supporting rapid indexing or high conveyor velocities during continuous operation. An integrated blocking brake provides 22 Nm of static torque so vertical axes can be held without external clamps when power is removed. Cabling exits on side A, which simplifies routing where drives and sensors share a common cable path, and the power and feedback interface uses a sealed connector. The encoder channel uses Digital servo feedback (DSF), delivering high-resolution position data to the drive for tight velocity control and accurate positioning. A centering diameter of 110 mm aligns the motor concentrically with mounting adapters and helps reduce radial runout under load.

The motor belongs to size 093, which places it in the mid-range frame outline of the MDD platform. The length code C gives the motor a longer active stack for higher continuous output. It has a plain shaft for direct coupling installation, and a shaft seal helps limit lubricant migration from connected gear stages. Standard balancing keeps vibration within normal limits for direct coupling, and the housing remains suitable for circulated-air cabinet cooling arrangements. These features support stable operation in machinery that combines frequent starts, stops, and precise speed control.