Product Description:

The MDD093C-N-030-N2M-130PR0 is a synchronous servomotor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. This model is intended for use with digital drive controllers where closed-loop torque and velocity control are required in automated machinery. It converts regulated electrical input into repeatable rotary motion for positioning axes, packaging equipment, and material-handling units. The motor supports accurate starts, stops, and speed changes in systems that depend on consistent servo response during continuous production.

It uses a centering pilot of 130 mm to align the stator flange with adjacent mechanical fixtures, and the rotor is balanced for steady operation at a rated speed of 3000 rpm. Position data is generated by an integrated multi-turn absolute encoder and returned through Digital servo feedback (DSF), allowing the controller to track shaft position over multiple revolutions without an external sensor. Power and feedback connections are mounted on the right side of the end bell so cabling exits in that direction, which helps keep routing orderly in side-entry installations. Torque is transmitted through a keyway shaft, and a shaft seal helps limit dust or coolant ingress during production duty.

The motor is supplied without a blocking brake, so static holding force must be provided by the drive or by external machine hardware when the axis is stopped. A molded connector carries both phase conductors and sensor leads, which keeps the external interface compact and reduces the number of separate cable entries. The motor uses length code C, which indicates a deeper stator stack than shorter motors in the same frame size. Its Standard housing and single-ended shaft suit compact digital drive applications that require direct coupling and clear access around the non-drive side.