MDD093C-N-030-N2M-130PL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
59 Seconds
The Bosch Rexroth Indramat MDD093C-N-030-N2M-130PL0 is a motor for digital drive controllers from the MDD Synchronous Motors series. It features a nominal speed of 3000 min⁻¹, a 130 mm centering diameter, and standard housing with a left-facing connector. The motor offers digital servo feedback and includes an integrated multiturn absolute encoder, a keyway shaft with shaft seal, and no blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-030-N2M-130PL0 is an AC synchronous motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It serves as the mechanical output for digital drive controllers, converting commanded current into regulated torque and speed for conveyors, indexing tables, and automated tooling lines. Standardized mechanical and electrical interfaces allow the motor to connect directly with compatible Rexroth power modules used in industrial automation. This design supports precise motion control in applications that require repeatable acceleration, stable running speed, and dependable position response during continuous machine operation.
A centering flange diameter of 130 mm positions the stator precisely against mounting surfaces and helps minimize radial runout. Power and feedback leads exit on the left side, and a single plug-in connector keeps cable routing compact while preserving shielding continuity. Frame designation 093 sets the cross-section and thermal capacity that support continuous motion at a nominal speed of 3000 rpm. That speed works well with vector drives, so extra gear reduction is not always necessary. Internally, length code C extends the active stack to increase continuous torque without changing the flange outline. Because the rotor is supplied without a blocking brake, any static holding force must come from the controller or an external mechanical lock.
High-resolution feedback is provided by the integrated multiturn absolute encoder, enabling position recovery without homing after power loss and supporting closed-loop digital servo feedback. Shaft ingress protection is reinforced by a shaft seal, which helps limit lubricant escape and blocks dust or coolant at the coupling interface. The output shaft uses a keyway profile that mates with standard hubs for straightforward torque transmission. This arrangement supports accurate servo operation in axes that require dependable positioning, smooth speed regulation, and consistent motion over repeated production cycles.
Frequently Asked Questions about MDD093C-N-030-N2M-130PL0:
Q: What type of encoder is included on the MDD093C-N-030-N2M-130PL0 motor?
A: This model features an integrated multiturn absolute encoder for precise position tracking.
Q: What is the nominal speed of the MDD093C-N-030-N2M-130PL0 motor?
A: The MDD093C-N-030-N2M-130PL0 operates at a nominal speed of 3000 revolutions per minute.
Q: What shaft type does the MDD093C-N-030-N2M-130PL0 provide?
A: The motor comes with a keyway shaft type for secure mechanical coupling.
Q: Does the MDD093C-N-030-N2M-130PL0 motor come with a holding brake?
A: This model does not include a holding brake.
Q: What is the connection type and direction on the MDD093C-N-030-N2M-130PL0?
A: A connector is used for the electrical connection, which is oriented to the left.
