Product Description:

The MDD093C-N-030-N2M-130PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts electrical power into precise rotary motion for automated axes, pick-and-place heads, and similar positioning tasks. The compact housing helps reduce installation space, and the motor supports closed-loop speed and position control in high-cycle manufacturing lines. This motor is suitable for applications that require accurate starts, stops, and repeatable positioning during continuous production.

A centering pilot diameter of 130 mm provides accurate seating in compatible mounting flanges and helps keep shaft alignment consistent after installation. Power and feedback plugs face Side B, so cables can be routed away from the load side and kept clear of adjacent moving parts. A connector provides a direct plug-in interface instead of fixed terminal wiring, which simplifies motor attachment during assembly. Rotor position is captured by an integrated multi-turn absolute encoder, which reports shaft angle across multiple revolutions and removes the need for a homing routine after power loss. The motor is supplied without a holding brake, so any stationary load must be held by the drive or by an external mechanism.

The drive receives position information through digital servo feedback (DSF), which supports precise speed regulation and responsive closed-loop control during changing load conditions. The rated operating speed is 3000 rpm, giving the motor a suitable range for indexing, transfer, and general servo motion. Torque is transmitted through a keyway shaft profile to help prevent slippage under cyclic loads and repeated reversals. The shaft is supplied with a shaft seal, which helps limit dust or coolant ingress into the bearing cavity and protects the bearing area during routine machine operation. Standard dynamic balancing reduces residual vibration, and the single-ended shaft layout keeps the motor compact for enclosed machine assemblies.