Product Description:

The MDD093C-N-030-N2M-130PA2 belongs to the MDD Synchronous Motors series from Bosch Rexroth Indramat. It is intended for use with digital drive controllers and supplies coordinated torque and speed to axes in automated machinery. In multi-axis systems, the motor connects directly to the drive so the controller can use the integrated feedback for closed-loop position and speed regulation. That arrangement supports repeatable motion in packaging, handling, and other factory equipment. Because the feedback device is integrated into the motor, the axis can maintain stable response even when load conditions change during continuous operation.

A centering flange diameter of 130 mm helps align the motor with a gearbox or mounting plate and supports accurate shaft positioning. Rated motion occurs at a nominal speed of 3000 rpm, giving the axis a predictable operating speed during normal use. The motor has length code C and frame size 093, which indicate its housing proportions in this series. A built-in blocking brake provides 22 Nm of holding torque when power is removed, which helps keep vertical or suspended loads from drifting at standstill. The rotor is balanced to the standard grade, the stator frame uses the standard housing version, and the shaft uses a keyway with no extension on side B.

Power and feedback connections are located on Side A, which can simplify cable routing in compact electrical enclosures. Rotor position is reported by a multi-turn absolute encoder, and the drive processes that signal as DSF digital servo feedback for closed-loop control. This feedback arrangement lets the controller monitor shaft position over multiple revolutions without requiring a separate interface module. The motor also has a shaft seal to help protect the bearing area from contamination and lubricant migration. A plug-in circular connector keeps the electrical connection compact and supports standard wiring practice near the motor body.