Product Description:

The MDD093C-N-030-N2M-130GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It is intended for operation with digital drive controllers, where it provides precise torque and position control for industrial automation equipment. The motor converts electrical commands from the drive into mechanical rotation for axes that require repeatable speed, stable servo response, and accurate feedback during continuous operation. This makes it suitable for packaging, handling, and other motion systems that depend on closed-loop performance.

At a nominal speed of 3000 rpm, the rotor provides continuous motion that suits common servo applications. The centering shoulder measures 130 mm, allowing the flange to seat firmly against mounting surfaces and keep the motor aligned with the load shaft. Power and feedback conductors exit on the left side, and the circular connector interface simplifies plug-in wiring inside the cabinet. Position information is provided by an integrated multi-turn absolute encoder, which works with the drive’s digital servo feedback interface to report shaft position across multiple revolutions without requiring a homing cycle after startup. This arrangement helps the controller retain position information during normal machine operation.

A blocking brake is installed, and it produces 11 Nm of static holding torque so vertical or indexing axes can remain in place when power is removed. The output uses a plain shaft, and the motor has with a shaft seal protection at the bearing seat to help limit contaminant ingress. The motor has length code C and frame size 093, and the design omits a side B extension to reduce space at the non-drive end. Mechanical vibration is controlled by the standard balancing grade selected for this model. A digital servo feedback transducer communicates through the DSF channel so the drive can maintain closed-loop speed and position regulation during operation.