MDD093C-N-030-N2M-130GL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
51 Seconds
The Bosch Rexroth Indramat MDD093C-N-030-N2M-130GL0 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. It features a nominal speed of 3000 rpm, a 130 mm centering diameter, and an integrated multiturn absolute encoder. The motor has a plain shaft with shaft seal and digital servo feedback, and uses a standard housing and connector for left-side connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-030-N2M-130GL0 is a servo motor built by Bosch Rexroth Indramat for use with digital drive controllers in the MDD Synchronous Motors series. Designed as an electromechanical actuator, it converts controlled electrical input into precise rotational motion for positioning, conveying, or synchronized tooling tasks on automated lines. It fits modular machine platforms that use standardized motors across multiple axes. This makes the motor suitable for packaging, handling, and other motion-control machinery that requires repeatable operation.
It uses standard balancing so shaft vibration remains within ISO limits. That balancing helps reduce vibration transfer to couplings and connected machine elements during rotation. The motor mates to machine frames through a centering pilot of 130 mm, aligning the 093 frame size with precision seats. Under rated conditions, the rotor reaches 3000 rpm, allowing direct coupling to high-speed mechanical stages. Power and feedback conductors exit on the left side and terminate on a sealed circular connector. Closed-loop regulation is handled by digital servo feedback (DSF), which streams high-resolution position data to the drive. The cast housing follows the standard MDD profile for consistent installation dimensions. The design is supplied without a blocking brake, leaving static holding duties to the drive or external clamps.
The C length code indicates an extended active stack, and the windings are thermally matched to that geometry. The assembly includes a multi-turn absolute encoder, giving the controller a persistent position reference across full revolutions and after power cycles. Motion is transmitted through a plain shaft with only the standard side-A end exposed, simplifying coupler selection and leaving no output shaft at the opposite end. A shaft seal around that journal blocks splash and airborne particles, supporting installation in typical machine environments. This layout also keeps the drive end straightforward for common coupling arrangements.
Frequently Asked Questions about MDD093C-N-030-N2M-130GL0:
Q: What type of encoder is included in the MDD093C-N-030-N2M-130GL0 motor?
A: The MDD093C-N-030-N2M-130GL0 features an integrated multiturn absolute encoder for precise position feedback.
Q: What is the nominal speed of the MDD093C-N-030-N2M-130GL0 motor?
A: This motor operates at a nominal speed of 3000 min⁻¹.
Q: What are the shaft details on the MDD093C-N-030-N2M-130GL0 motor?
A: The shaft type on this model is a plain shaft equipped with a shaft seal for added protection.
Q: Does the MDD093C-N-030-N2M-130GL0 motor have a holding brake?
A: The MDD093C-N-030-N2M-130GL0 is manufactured without a holding brake.
Q: What is the connection direction and type for the MDD093C-N-030-N2M-130GL0 motor?
A: The connection direction for this model is on the left side and utilizes a connector type interface.
