Product Description:

The MDD093C-N-030-N2M-130GB2 is a synchronous servo motor from the MDD Synchronous Motors series developed by Bosch Rexroth Indramat. It is intended for use with digital drive controllers, where commanded current is converted into rotary motion for tightly regulated axes in automated machinery. Integrated feedback hardware and standardized mounting features allow the motor to operate as a compact closed-loop axis component without requiring a separate external feedback assembly.

This model uses a centering diameter of 130 mm, which helps align the housing with standard machine flanges and supports accurate mounting. Power and signal connectors are positioned on side B, placing the cable outlet away from the driven load in many machine layouts. An integrated multi-turn absolute encoder tracks shaft position over multiple revolutions, so axis position remains available after a power interruption. For load holding, the blocking brake provides 22 Nm of static torque when drive power is removed. Position and velocity signals are transmitted through digital servo feedback (DSF), allowing the controller to maintain closed-loop operation with good resistance to electrical noise.

At a rated speed of 3000 rpm, the motor supports conveyor sections, packaging stations, and indexing applications that require stable servo operation. The C length code gives the motor a longer active section within the 093 frame, which supports higher continuous torque than shorter versions of the same frame size. The output uses a plain shaft with a fitted shaft seal, and the motor uses a single shaft end. Dynamic balance follows the standard grade, and the cast housing uses the standard pattern for this motor platform. Electrical hookup is made through a sealed connector, which keeps the connection enclosed and simplifies cable routing.