Product Description:

The MDD093C-N-030-N2M-130GA2 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat and included in the MDD Synchronous Motors series. It is used with digital drive controllers and converts regulated current into precise rotary motion for packaging lines, pick-and-place stations, and similar automated axes. The motor supports closed-loop positioning and speed control where repeatable motion is required across frequent starts, stops, and direction changes. This type of motor is commonly used in automation systems that need accurate acceleration and stable speed regulation under changing loads. Its size 093 frame and C length provide higher torque capacity while keeping the established mounting interface, which helps the motor fit existing machine layouts.

The motor has a nominal speed of 3000 rpm, allowing fast operation in positioning and speed-controlled applications. Position and velocity data are returned through digital servo feedback with an integrated multi-turn absolute encoder, so the drive retains shaft position information after power cycling and can monitor rotor movement continuously during operation. A centering pilot of 130 mm aligns the motor accurately with gearboxes or couplings and helps limit radial runout at the mounting face. A blocking brake provides 22 Nm of holding torque, keeping vertical loads in place when the drive is disabled. The housing uses an unvented design and relies on ambient airflow for heat dissipation instead of forced ventilation.

Power and feedback plugs are located on Side A, and the keyed connector arrangement supports secure cable attachment while keeping the interface easy to align during installation. The output shaft is a plain shaft with standard end machining, and no secondary shaft is provided on side B. A factory-installed shaft seal helps limit lubricant or dust migration along the journal during operation, which supports cleaner coupling areas and protects adjacent bearing surfaces. The motor uses standard balancing, which helps keep vibration low when it is mounted on light-frame machinery or connected to precision mechanical components.