Product Description:

The MDD093C-N-030-N2M-110PR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it supplies closed-loop rotary motion for positioning and velocity tasks in packaging lines, material-handling gantries, and transfer stations. By combining permanent-magnet excitation with encoder feedback, the unit converts drive current into accurately regulated shaft torque and position data for industrial automation. Its operating concept supports repeatable motion on axes that must start, stop, and reverse direction with stable control.

The frame designation 093 sets the flange size and bolt pattern used for this motor class. A centering diameter of 110 mm locates the housing precisely on the pilot and helps maintain accurate alignment during installation. Under rated electrical conditions, the rotor reaches 3000 rpm, which suits common servo applications that require a broad usable speed range. Position is reported through digital servo feedback (DSF), and absolute position data is provided by the integrated multiturn absolute encoder. This feedback arrangement allows the connected drive to monitor shaft motion continuously and retain position information through normal power cycling.

Static load retention is provided by a blocking brake that develops 11 Nm of holding torque when the drive is disabled. All power and signal conductors exit on the right side through a sealed connector, which helps keep cable routing organized in compact machine layouts. The output shaft is machined with a keyway, giving positive drive to pulleys or couplings, while the installed shaft seal helps limit contaminant entry. Length code C indicates a longer motor body in this frame size, and the rotor uses standard balancing for smooth operation across the speed range. These features make the motor suitable for applications that need secure holding, accurate feedback, and straightforward mechanical integration.