Product Description:

The MDD093C-N-030-N2M-110PL0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with compatible digital drive controllers, the motor converts commanded current into proportional torque and precise rotary motion for automated production cells, handling stations, and material-processing equipment. By integrating rotor position feedback and standardized mounting geometry, the device supports accurate closed-loop positioning, repeatable speed control, and consistent axis behavior in industrial automation lines.

The motor uses a centering diameter of 110 mm, allowing precise alignment to gearboxes or machine frames while limiting radial runout during installation. Under rated excitation, the rotor reaches 3000 rpm, a nominal speed that balances dynamic response with thermal limits for continuous duty. Power is transmitted through a keyway shaft, giving positive torque transfer to couplings and other driven components. Position data returns through Digital servo feedback (DSF), supplying high-resolution incremental and commutation information to the drive. A shaft seal helps block lubricant escape and shields the interior from coolant or dust, complementing the IP65 housing.

The signal and power connectors are positioned on the left side, letting cables drop straight down when adjacent axes are mounted to the right and helping keep cable routing orderly in compact machine layouts. Rotor position is captured by an integrated multiturn absolute encoder, so the controller can recover angle after power is restored without a homing move. The unit is supplied without a blocking brake, so holding torque must come from the drive or an external lock when the axis is stopped. The medium build, designated length code C, provides a longer active stack than the B variant for higher continuous torque while keeping the 093 frame size. Standard rotor balancing and the sealed housing help limit vibration and contamination in general-purpose automation machinery.