Product Description:

The MDD093C-N-030-N2M-110GR0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers in coordinated industrial axes where precise torque and speed regulation are required. When paired with compatible drive modules, the motor converts commanded current into mechanical motion for closed-loop positioning in packaging machines, transfer lines, and general automation. Its synchronous design supports responsive acceleration and stable speed control during repeated machine cycles. This makes it suitable for axes that must start, stop, and settle accurately during automated production.

Continuous operation is possible at a nominal speed of 3000 rpm. Accurate mechanical registration is supported by a centering pilot of 110 mm, which helps position the flange concentrically on the machine frame. Power and feedback conductors exit on the right side, so cable routing can follow a fixed bend radius. A plug-in connector allows straightforward cable connection without hard wiring. For reference recovery after power loss, the motor includes an integrated multiturn absolute encoder, which records shaft position over multiple revolutions. The flange pilot also helps reduce mounting misalignment that could affect coupling alignment during operation.

The unit is supplied without a blocking brake, so holding torque must be provided by the drive or an external clamp during shutdown. Position data reaches the controller through digital servo feedback (DSF), supporting high-resolution current and position control without additional external transducers. The motor uses frame size 093 with length code C, providing a larger active section than shorter housings in the same platform. It has a plain shaft with a shaft seal, which helps limit oil or dust ingress at the bearing journal. This shaft arrangement is suited to installations where light contamination may be present near the motor face.