MDD093C-N-030-N2M-110GB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911250171
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
52 Seconds
The Bosch Rexroth Indramat MDD093C-N-030-N2M-110GB2 is part of the MDD Synchronous Motors series and is designed as a motor for digital drive controllers. It features a nominal speed of 3000 rpm, a holding brake torque of 22 Nm, and an integrated multiturn absolute encoder. The motor comes with a plain shaft, a centering diameter of 110 mm, and uses digital servo feedback for motor feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-030-N2M-110GB2 is a servo motor built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies the rotary motion needed for axis positioning in packaging lines, material-handling gantries, and assembly systems. By converting drive currents into controlled torque, the unit forms the electromechanical link between the inverter and the mechanical load in industrial automation. It is suited to servo axes that must start, stop, and reverse direction while maintaining coordinated motion with the rest of the machine. Because the motor works with digital control loops, it can support accurate response to changing load conditions during continuous production.
Its nominal operating point is 3000 rpm, and thermal, current, and torque values are referenced at that speed. A blocking brake mounted at the non-drive end supplies 22 Nm of static holding torque so vertical or suspended axes remain fixed when power is removed. Position data comes from an integrated multiturn absolute encoder, allowing the controller to recover the exact shaft angle after power cycles without a homing routine. This feedback arrangement improves restart behavior after power interruptions and helps the drive maintain consistent axis reference data. All power, brake, and feedback plugs are oriented toward Side B, and the mechanical frame follows the 093 size designation that standardizes the flange and bolt-circle dimensions within the motor family.
During installation, the motor centers on a 110 mm pilot ring to maintain concentric alignment with gearboxes or couplings. Leakage paths are restricted by a shaft seal, helping the housing operate in areas exposed to dust or coolant splash. Velocity and angle information are transmitted as Digital servo feedback (DSF) signals, supporting high-resolution control loops in the connected drive. The rotor is balanced to a standard grade, which helps limit residual vibration during rapid acceleration. The connector layout keeps external wiring consolidated at one end of the motor, and the unit also uses a plain shaft without a side-B extension, motor length code C, a connector-based termination scheme, and a conventional housing construction.
Frequently Asked Questions about MDD093C-N-030-N2M-110GB2:
Q: What kind of encoder is built into the MDD093C-N-030-N2M-110GB2 motor?
A: The MDD093C-N-030-N2M-110GB2 uses an integrated multiturn absolute encoder for precise position measurement.
Q: Does the MDD093C-N-030-N2M-110GB2 feature a holding brake, and what is its torque rating?
A: This motor is equipped with a blocking brake that provides a holding torque of 22 Nm.
Q: Where is the connection located on the MDD093C-N-030-N2M-110GB2 motor and what type is used?
A: The connection is located on Side B of the motor and uses a connector type interface.
Q: What is the nominal speed of the MDD093C-N-030-N2M-110GB2 synchronous motor?
A: It has a nominal speed of 3000 min⁻¹, supporting efficient motion applications.
Q: What shaft type and sealing does the MDD093C-N-030-N2M-110GB2 motor have?
A: This model has a plain shaft design with a shaft seal for added protection.
