Product Description:

The MDD093C-N-030-N2M-110GA1 is a synchronous servo motor produced by Bosch Rexroth Indramat and placed within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts regulated electrical power into mechanical rotation for positioning tables, packaging axes, and other cyclic automation tasks where feedback-controlled shaft motion is required. A connector interface handles the electrical terminations, keeping the motor suited to compact machine layouts that need organized cable routing.

The motor’s rated operating point is a nominal speed of 3000 rpm, allowing the drive to match common inverter output frequencies without mechanical gearing. Precise centering during installation is supported by a 110 mm centering diameter, which aligns the motor with the machine housing to help minimize vibration. An integrated blocking brake delivers 11 Nm of static holding torque, so vertically mounted loads can remain secured when power is removed. Power and feedback conductors exit on Side A, which can simplify cable routing in cabinets mounted to the left of the axis. The output element is a plain shaft, so torque is transmitted through friction-fit couplings rather than keys or splines. The motor also uses standard rotor balancing, a standard housing, and a shaft seal to support regular industrial operation.

Position accuracy is achieved with an integrated multi-turn absolute encoder, providing continuous angle information throughout multiple revolutions for homing-free startups. Feedback is relayed as digital servo feedback, giving the controller high-resolution velocity and position data over a serial interface. The frame size code is 093, and the length code is C. These codes indicate the motor’s stack height and thermal mass for the selected housing size. The shaft is single-ended and does not include a side B extension.