Product Description:

The MDD093C-N-030-N2L-130PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts regulated drive output into precise rotary motion for industrial positioning and speed-control tasks. The unit has frame length C, uses a standard housing, and comes with a blocking brake for load retention when power is removed. Its rotor is balanced to the standard grade so vibration transmitted to the machine remains within normal servo operating levels. This type of motor is commonly used on feed axes, transfer stations, and handling equipment that require repeatable motion under closed-loop control.

Mechanical alignment is supported by a 130 mm centering diameter that seats the flange accurately on matching mounting surfaces. Power and feedback cables exit on the right side through a single connector, which keeps the interface compact and simplifies routing where access is limited. The motor has a nominal speed of 3000 rpm, making it suitable for common industrial motion profiles that need a broad operating range. Torque is delivered through a keyway shaft, and there is no side B shaft extension, so the non-drive end remains unobstructed. The flange fit helps maintain coupling alignment and can reduce unnecessary bearing stress during continuous cycling.

The integrated blocking brake provides 22 Nm of holding torque to help prevent load drift when the controller is disabled. Position information is returned through digital servo feedback (DSF), allowing the connected drive to monitor rotor motion directly during closed-loop operation. The motor is equipped with a shaft seal, which helps limit the entry of dust and reduces lubricant migration from adjacent mechanical components. This sealed shaft arrangement is useful where the motor is mounted near gear units or in production areas with airborne debris.