Product Description:

The MDD093C-N-030-N2L-130PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into rotary motion for automated handling, packaging, and machining axes. Its mechanical layout, electrical connection style, and integrated feedback arrangement make it suitable for multi-axis systems that require stable torque output and accurate closed-loop speed control. This motor is typically applied where repeatable motion and dependable response are needed during continuous industrial operation.

This motor runs at a nominal speed of 3000 rpm, supporting drive programs that require moderate spindle or conveyor speeds without additional gearing. The centering pilot has a diameter of 130 mm, which helps align the housing accurately with the machine interface. Rotor position is reported through digital servo feedback (DSF), so the controller receives high-resolution signals for real-time correction of speed and position. Within the MDD frame system, the unit is classified as size 093, and its active stack uses length code C. These frame identifiers place the motor within a known mechanical envelope and support consistent integration with matching drive components.

The motor is supplied without a blocking brake, so load holding during power loss must be provided by the drive or by external mechanical means. Oil ingress is limited by a shaft seal at the output end, and torque is transmitted through a keyway that fits common couplings and driven elements. Cable plugs are arranged as right-side connections, which can simplify routing when the cabinet or cable path is positioned on the opposite side of the axis. The housing dissipates heat to the surrounding air, and the single-ended shaft design keeps the output on side A while avoiding an extension on side B.