Product Description:

The MDD093C-N-030-N2L-130PL1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts controlled three-phase current into precise shaft rotation for indexing tables, pick-and-place axes, and milling spindles. Fast torque response and stable speed under changing load help the motor support coordinated motion in production equipment where repeatable positioning and smooth acceleration are required. This operating behavior suits machines that perform frequent starts, stops, and direction changes while maintaining accurate tracking between commanded and actual shaft position.

Mechanical alignment is set by a centering diameter of 130 mm, which fits matching machine interfaces and helps keep the motor face accurately seated during installation. The nominal operating speed is 3000 rpm, giving the axis a useful range for medium-speed transport and tooling duties while preserving servo responsiveness. A holding brake rated at 11 Nm provides static torque to resist drift when power is removed. Power and feedback terminations exit on the left side of the housing, which can simplify cable routing when the machine layout favors a single cable path. Position data is returned through digital servo feedback, allowing the controller to correct speed and position in closed-loop operation. Output torque is transmitted through a keyway shaft so pulleys or couplings can be secured against slip.

A rotor balance classified as standard reduces residual vibration, which helps the motor run smoothly on precision frames and direct-coupled loads. The motor uses frame size 093 with length code C, giving it a larger active section than shorter lengths in the same platform and supporting higher continuous torque capability within this housing style. A shaft seal, standard housing, and connector interface protect internal components while keeping the package compatible with common MDD cabling arrangements. This layout also supports orderly integration in machine assemblies that need protected connections and dependable mechanical alignment over long operating cycles.