Product Description:

The MDD093C-N-030-N2L-130PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts controlled three-phase electrical power into rotary motion with accurate torque response. This makes the motor suitable for positioning tasks on automated tooling, pick-and-place units, and conveyor axes that require stable speed control and repeatable movement during changing process demands.

During operation, the rotor reaches a nominal speed of 3000 rpm, which supports fast cycle timing in automated axes. The housing uses a 130 mm centering diameter to maintain accurate alignment between the motor and the driven machine element. All power, signal, and encoder connections are arranged on the left side, which can simplify cable routing when the control cabinet is placed to the right of the machine. The motor is supplied without a blocking brake, so load holding during power loss must be handled by an external brake or by electrically maintained torque when the application permits it. Position information is returned through digital servo feedback, allowing the controller to correct commutation and speed errors continuously during motion.

The front endbell is equipped with a shaft seal to limit dust and coolant entry around the output journal and to protect internal bearing areas. The output shaft uses a keyway, which provides a positive mechanical connection for pulleys or rigid couplings during repeated acceleration and deceleration. The motor has frame size 093 and length code C, giving it a larger active stack within this diameter class for higher continuous torque capability. Standard dynamic balancing helps reduce residual vibration, and the housing fins support steady heat dissipation during cyclic industrial operation.