Product Description:

The MDD093C-N-030-N2L-130PB0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is designed for use with digital drive controllers and is typically installed in positioning axes or process lines that require electronic speed and torque regulation. The unit follows the 093 motor size, comes in a standard housing, and integrates directly through the series connector system to minimize wiring during cabinet assembly and simplify cable routing within the machine.

During operation, the rotor can reach a nominal speed of 3000 rpm, giving drive controllers a predictable velocity reference for closed-loop motion tasks. Mechanical centering on a spindle or flange is simplified by the 130 mm centering diameter, and all power and feedback cables exit on Side B to support machines that have fixed cable ducts on that face. The primary interface is a compact connector that locks in place and provides a secure electrical connection for power and feedback circuits. This version is supplied without a blocking brake, so external clamping or motor torque must hold the load when power is removed. Torque is transferred to machinery through a shaft machined with a keyway, which helps prevent slip between the motor and coupled elements during rapid acceleration.

The front bearing plate is furnished with a shaft seal that limits grease loss and helps keep contaminants out of the interior air gap. Commutation data is returned as digital servo feedback, enabling high-resolution position loops without analog drift. A motor built with standard balancing runs smoothly across the full speed range and imposes low dynamic loads on adjacent bearings. The electromagnetic core uses length code C, giving the stator an active length suited to mid-range torque demands, and the shaft end is the standard single-ended style for conventional coupling arrangements.