Product Description:

The MDD093C-N-030-N2L-130PA0 is a three-phase synchronous servo motor built by Bosch Rexroth Indramat and supplied in the MDD Synchronous Motors series. It is intended for use with digital drive controllers on production lines, where it converts electrical commands into controlled rotary motion for indexing tables, packaging equipment, and other axis drives. In closed-loop operation, the motor supports accurate speed changes and repeatable positioning during start, run, and stop sequences. Its overall design suits industrial automation tasks that require steady torque response and reliable motion control over repeated cycles.

A centering flange of 130 mm helps align the motor accurately to machine frames and connected drive components. All power and feedback conductors exit on Side A through a keyed connector, which keeps the connection arrangement compact and helps organize cable routing near the housing. At the feedback end, digital servo feedback (DSF) returns high-resolution position data to the controller so commutation and speed regulation remain precise during dynamic motion. Under rated conditions, the motor reaches 3000 rpm, giving it a nominal speed suited to fast traverse moves and responsive axis behavior. The housing uses a sealed design that helps protect internal parts from dust during normal industrial operation.

The stator uses length code C, which provides a longer active stack than shorter versions in the same frame size. Motion is transmitted through a shaft with a keyway, allowing positive torque transfer to couplings, pulleys, or gearbox inputs. The motor is built with a shaft seal, which helps limit the entry of coolant mist, dirt, and lubricants at the shaft opening. It is supplied without a blocking brake, so any holding function at standstill must be provided by the drive system or external mechanics. The shaft is present only on the drive side, while the opposite end remains blank under the standard shaft-end arrangement.