Product Description:

Bosch Rexroth Indramat manufactures the MDD093C-N-030-N2L-130GR0 within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive current into controlled rotary motion for automated axes in assembly lines, packaging stations, and material-handling cells. Its integrated rotor magnets and stator windings suit medium-power applications that require rapid acceleration and stable velocity. Typical uses include feed axes, transfer units, and indexing stations that run repeated start-and-stop cycles. The compact form also fits machines where installation depth is limited and reliable closed-loop motion is required.

A centering flange diameter of 130 mm provides a repeatable mounting reference for alignment with gearheads or machine plates. Electrical and feedback leads exit on the right side, which helps cable routing in narrow machine frames. A sealed connector interface combines power, feedback, and protective earth in one plug. At a nominal speed of 3000 rpm, the motor can support cyclic motion typical of indexing applications while remaining within its normal thermal range. The motor length code C indicates an extended active stack that increases continuous torque without changing the flange pattern.

This version is supplied without a blocking brake, so any holding force at standstill must come from the drive or an external device. Position feedback is provided by digital servo feedback, supporting precise commutation and stable speed control. The frame size 093 gives a fixed motor envelope for mounting and surrounding clearances. A plain shaft transfers torque to pulleys or couplings, and a shaft seal helps limit contamination from the load side. Standard dynamic balancing helps reduce vibration during operation, and the housing is intended for typical industrial installations when the motor is mounted in an enclosed cabinet.