Product Description:

The MDD093C-N-030-N2L-130GL2 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts regulated drive current into rotary motion for positioning tables, packaging axes, and other cyclic automation tasks. A built-in blocking brake keeps loads stationary when power is removed, which is useful on vertical axes and indexing stations that must hold position between cycles. The standard housing suits installation in control cabinets or clean machine frames without extra protective covers.

This model reaches a nominal speed of 3000 rpm, giving a consistent operating speed when paired with a compatible drive. The brake supplies 22 Nm of holding torque, so suspended or vertical loads remain fixed during downtime. Position data is returned through digital servo feedback (DSF), enabling the controller to close its speed and position loops without an external encoder. A centering diameter of 130 mm aligns the flange to machine frames, and the power and feedback plugs are oriented on the left side of the motor for simpler cable routing. Wiring is completed through a sealed connector rather than flying leads, and torque is delivered through a plain shaft that mates with standard couplings. The shaft is present only on side A, and the C motor length uses a longer active stack to support higher dynamic output without changing the mounting pattern.

Drive smoothness is aided by standard balancing, which helps limit residual vibration during high-speed operation. A labyrinth and lip arrangement forms the integral shaft seal, helping keep lubricant in and airborne contaminants out when the motor is used in dusty production lines. Size code 093 identifies the frame envelope used across the MDD family and matches the series bolt circle and mounting dimensions. The standard housing finish supports installation in clean machine areas and enclosed cabinet environments.