MDD093C-N-030-N2L-130GL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
15 Seconds
The Bosch Rexroth Indramat MDD093C-N-030-N2L-130GL1 is a motor for digital drive controllers, part of the MDD Synchronous Motors series. It features a nominal speed of 3000 min⁻¹, a centering diameter of 130 mm, and comes with a plain shaft and shaft seal. The motor has a holding brake with 11 Nm of torque and digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-030-N2L-130GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is designed for use with digital drive controllers, where it provides closed-loop position and velocity control in automated machinery. An integrated blocking brake helps maintain axis position during power-off conditions, which is useful on axes that must remain stable at standstill. The motor couples through a standard housing that supports straightforward mounting in industrial machine frames.
During operation, the rotor can reach 3000 rpm, giving the drive system a consistent speed range for high-cycle motion. A centering flange diameter of 130 mm aligns the motor accurately with gearboxes or adapter plates and helps maintain proper fit during installation. The blocking brake provides 11 Nm of holding torque, which is suitable for securing medium-load vertical axes when the motor is not energized. Power and feedback conductors exit on the left side, which can simplify cable routing in mirrored machine layouts. Rotor position is returned to the controller through digital servo feedback (DSF), allowing commutation and status monitoring without separate external sensing devices. The housing removes heat by natural convection, so no auxiliary blower is required for normal cooling.
Mechanical connection is supported by a sealed plug-in connector that allows the motor to be connected without terminal block wiring. The winding stack uses length code C, which gives the motor a longer active section than shorter versions in the same frame size. Shaft protection is improved by a factory-installed shaft seal, which helps limit the entry of coolant splash or airborne oil. Motion is transferred through a plain shaft, and the single-sided shaft arrangement keeps the non-drive end free of a side-B extension. Standard balancing helps reduce residual vibration, and the 093 frame size remains compatible with existing Rexroth gearheads used in compact machine assemblies.
Frequently Asked Questions about MDD093C-N-030-N2L-130GL1:
Q: What kind of holding brake does the MDD093C-N-030-N2L-130GL1 motor have?
A: This model is equipped with an 11 Nm blocking brake for secure holding during power-off states.
Q: What type of motor feedback is used in the MDD093C-N-030-N2L-130GL1?
A: The MDD093C-N-030-N2L-130GL1 features digital servo feedback (DSF) for motor position monitoring.
Q: What is the nominal speed of the MDD093C-N-030-N2L-130GL1 motor?
A: The motor offers a nominal speed of 3000 min⁻¹, suitable for typical motion control applications.
Q: What type of shaft and seal does the MDD093C-N-030-N2L-130GL1 provide?
A: This motor includes a plain shaft with a shaft seal for added protection against contaminants.
Q: What is the connection direction and type for the MDD093C-N-030-N2L-130GL1?
A: The electrical connection on this motor is made via a left-facing connector.
