Product Description:

The MDD093C-N-030-N2L-130GB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for attachment to digital drive controllers, it transforms electrical commands into controlled rotary motion for positioning duties in automated production and assembly equipment. Its construction supports precise motion sequences where stable speed regulation and repeatable torque are required for reliable industrial automation. This makes the motor suitable for feed axes, indexing stations, and handling units that depend on accurate starts, stops, and repeatable motion under changing loads.

Its mechanical mounting reference is a centering diameter of 130 mm, allowing precise alignment during installation. Power and feedback conductors exit at the rear on Side B, and the plug-style interface uses a Connector for direct cable attachment. The rotor is balanced to a standard quality grade, reducing vibration when the shaft reaches the nominal speed of 3000 rpm. The motor is supplied without a blocking brake, so a vertical axis must rely on an external holding device when power is removed. The motor has length code C, which indicates the active stack height, and the housing uses a standard design for this frame. This arrangement also supports compact machine layouts where rear cable routing is preferred.

Closed-loop operation uses Digital servo feedback, which delivers high-resolution position data so the drive can refine current and velocity loops during acceleration, deceleration, and steady running. Within the MDD family, this unit corresponds to size 093, giving a balance of inertia and responsive acceleration for medium-duty axes. The output uses a plain shaft, and a shaft seal helps prevent lubricant migration toward the encoder area. The shaft end is standard and absent on the rear side, which leaves the opposite end free of a second output extension. Because the motor is intended for digital drive controllers, compatible control cards can read its electronic nameplate parameters automatically during startup.