Product Description:

The MDD093C-N-030-N2L-110PR2 is a three-phase permanent-magnet synchronous motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts electrical commands into controlled shaft rotation for positioning, conveying, and related motion tasks in automated production equipment. The design suits medium-power axes used in packaging machinery, material-handling gantries, and general machine tools where steady torque response and repeatable motion are required. This operating role makes it suitable for applications that need accurate starts, stops, and speed changes during normal machine cycles.

Mechanical alignment is simplified by a centering diameter of 110 mm, which allows precise seating on mounting flanges without additional pilot rings. The rotor reaches a nominal speed of 3000 rpm, giving the drive a practical operating range for indexing moves and continuous-duty cycles. To hold vertical loads when power is removed, the motor includes a blocking brake with 22 Nm of static holding torque. Rotor position is reported through Digital servo feedback (DSF), and power is transferred through a shaft with a keyway while an internal shaft seal helps retain lubricant during repeated motion.

Integration is simplified because the power and feedback plug faces are mounted on the right side of the housing and use a sealed connector interface, which helps keep cable routing compact and reduces exposure to coolant spray. Rotor and hub balancing are rated Standard, which helps reduce residual vibration during normal operation without requiring special coupling hardware. The stator core uses length code C in size 093, matching the standard motor housing used for common machine layouts. The housing layout also keeps the connection points accessible when the motor is mounted close to surrounding machine framing.