Product Description:

The Bosch Rexroth Indramat MDD093C-N-030-N2L-110PB1 belongs to the MDD Synchronous Motors series and is supplied as a motor for digital drive controllers. It converts commanded current from the drive into controlled torque for positioning, indexing, and speed-regulated motion in automated equipment. In coordinated axes, this response lets the controller correct load changes quickly and maintain stable rotary motion during repeated cycles. The enclosed housing supports direct installation in machine assemblies and helps protect the internal winding from normal industrial contamination.

During operation, the rotor reaches a nominal speed of 3000 rpm. Position data return through digital servo feedback (DSF), so the controller can maintain accurate speed and position regulation. All power, encoder, and brake leads exit on side B, and the motor uses a plug-in connector interface to simplify cable attachment. This arrangement helps route cables away from the mounting face and keeps the electrical connection compact at the rear of the motor. A centering pilot of 110 mm supports accurate alignment on the machine flange, and the C-length housing provides the active stack needed for this torque class.

Static holding is provided by an integrated blocking brake rated at 11 Nm when de-energized, which helps prevent vertical or back-driven loads from drifting at standstill. A protective shaft seal is fitted at the output end to help limit the entry of oil mist and similar contaminants. The output shaft uses a keyway for direct torque transmission to couplings or pulleys. With frame size 093, the motor fits the corresponding mounting geometry, and the single-ended shaft arrangement avoids extra overhung mass at the rear. This layout supports compact installation where clearance behind the motor must be kept under control.