Product Description:

The MDD093C-N-030-N2L-110GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is designed for use with digital drive controllers, where commanded current is converted into controlled rotary motion for precise axis movement. This arrangement supports accurate torque and speed control in positioning tables, packaging equipment, and material-handling systems. Because the motor works in a closed-loop drive system, it can respond quickly to changing load demands during acceleration, deceleration, and steady running.

The motor has a nominal speed of 3000 rpm, which gives the axis a high continuous operating speed under rated conditions. A centering flange diameter of 110 mm helps align the housing with the machine interface, and cabling exits through a right-side connection with a sealed connector for straightforward routing in compact installations. Motion feedback is provided through digital servo feedback, allowing the controller to monitor rotor position for closed-loop speed and torque control. This feedback path supports stable low-speed operation and accurate response when the mechanical load changes. The motor uses the extended C length housing, and the integrated blocking brake can hold the axis with a static torque of 11 Nm when power is removed.

The motor uses frame size 093 and a plain shaft output for standard mechanical coupling. A dedicated shaft seal helps retain internal lubrication while reducing the entry of dust and other airborne contamination near the bearing area. The drive-side shaft end is standard, and there is no second shaft on side B, which leaves more freedom for close mounting to couplings or gearboxes. This shaft arrangement is well suited to compact machine layouts where surrounding hardware must fit closely around the motor body without interfering with the cable exit or the mounted transmission parts.