Product Description:

The MDD093C-N-030-N2L-110GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts controlled armature currents into mechanical rotation for positioning and constant-speed tasks in automated machinery. The unit is used in closed-loop servo axes where compact construction and quick torque response help keep conveyor sections, packaging stations, and tooling spindles synchronized with the control system. This arrangement allows the drive to correct speed and position errors during rapid starts, stops, and load changes. The motor is suited for applications that need fast acceleration, stable low-speed control, and repeatable positioning over frequent duty cycles.

At a nominal speed of 3000 rpm, the rotor can follow command changes without slip, supporting repeatable cycle times in indexing tables and cutters. An internal blocking brake supplies 11 Nm of holding torque so vertical loads remain secure whenever the controller is disabled. The motor uses frame size 093, and the C length provides a longer active stack for higher continuous output in this housing size. A locating pilot of 110 mm centers the housing during installation and helps maintain accurate coupling alignment. These dimensions support proper fit on machine flanges and help preserve concentric mounting during assembly.

Smooth operation is aided by standard balancing, which minimizes residual forces transmitted to the machine frame at high acceleration. Power and encoder cables exit through a left-side connector, so the plug position is easier to reach when nearby components limit cable space. The keyed connector arrangement also helps keep power and feedback connections oriented correctly during installation. Position and velocity feedback are generated through digital servo feedback (DSF), allowing the drive to monitor rotor angle with fine resolution during motion. A fitted shaft seal helps keep lubricant inside the plain shaft assembly and reduces the entry of coolant splash and debris.