Product Description:

The MDD093C-N-030-N2L-110GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and delivered as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts inverter current into controlled rotary motion so automated lines can position loads or regulate speed with high accuracy. Its electromechanical format is aimed at packaging, printing, and handling stations that demand coordinated multi-axis movement and consistent dynamic response. The motor is suited to applications that need repeatable motion, stable acceleration, and reliable speed control during continuous machine operation.

This motor uses standard dynamic balancing to limit residual vibration on coupled shafts, and its centering flange is machined to a diameter of 110 mm for repeatable alignment with mounting hardware. Its nominal speed is 3000 rpm, which allows high operating speed under rated conditions. Feedback to the drive is provided through digital servo feedback (DSF), allowing precise closed-loop regulation of position and velocity. The rotor uses a plain shaft, so torque is transferred through hub clamping or other keyless couplings rather than a keyed journal. The motor is supplied without a blocking brake, so any axis that must remain fixed after power removal needs an external holding method.

Cabling enters from the machine side because the motor has a left connection direction, and all terminations are made through a compact connector interface for orderly cable routing. Oil ingress is restricted by an integral shaft seal, which helps protect internal components where lubricants or coolant splashes are present. The housing uses motor size 093 with the C-length format, giving the motor a larger active stack than shorter versions in the same frame. A standard cast housing encloses the stator laminations and permits convective cooling without additional airflow devices.