Product Description:

The MDD093C-N-030-N2L-110GB1 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into controlled rotary motion for positioning axes, conveyors, and tooling spindles. By combining permanent-magnet excitation with closed-loop feedback, the motor supports accurate speed regulation and repeatable positioning in automated assembly lines, packaging equipment, and other industrial machinery. It can be used in machines that require consistent motion quality during repeated starts, stops, and direction changes.

The centering pilot has a diameter of 110 mm, which provides a repeatable reference when the flange is fastened to a gearbox or machine frame. Power and feedback cables exit on side B, and the sealed connector interface allows the motor to be disconnected without opening the housing. The rotor has a synchronous operating speed of 3000 rpm, which suits servo systems used on indexing tables and pick-and-place axes. For power-loss retention, the built-in brake provides 11 Nm of holding torque to help keep a mounted load from drifting at standstill.

Position data is transmitted through digital servo feedback (DSF), allowing the controller to monitor rotor angle for accurate velocity and position loops. Frame designation 093 identifies the motor size, while length code C uses a longer active stack to support higher continuous output within the same basic footprint. The motor uses a plain shaft for direct coupling to external mechanical components, and the rear side is left free for the electrical connection area. A fitted shaft seal helps protect internal bearing spaces from contamination during operation, and standard dynamic balancing supports smooth running during acceleration.