Product Description:

The MDD093C-N-030-N2L-110GB0 is a synchronous servo motor built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for digital drive controllers, it converts three-phase electrical power into precise rotary motion for speed-controlled and position-controlled axes. The motor is used on material handling systems, packaging equipment, and printing machines where repeatable torque and quick response support coordinated motion under a central motion controller. Its servo design also supports synchronized indexing, feeder control, and other repetitive movements that require stable response during frequent acceleration and deceleration.

Its nominal speed of 3000 rpm sets the rated operating speed, giving the drive a predictable velocity range during normal operation in automated equipment. A centering diameter of 110 mm provides the pilot fit that aligns the motor housing to the machine plate and helps keep radial runout under control. Cable entries are located on side B, so power and feedback conductors exit opposite the driven load to simplify routing. The single plug-in connector combines motor phases, encoder lines, and protective earth in one housing, and digital servo feedback (DSF) supplies rotor position data for closed-loop commutation and accurate dynamic correction. This arrangement keeps the connection point compact at the motor housing.

The motor is supplied without a blocking brake, so external holding force is required when the axis is de-energized at standstill. A plain shaft supports coupling to pulleys or rigid hubs, and a shaft seal helps limit lubricant migration and particle ingress at the shaft opening. The rotor is balanced to the standard grade for general machine use. Frame designation 093 identifies the external dimensions and power range associated with this size, which helps maintain compatibility with matching mechanical layouts.