Product Description:

The MDD093C-N-030-N2L-110GA2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is designed for use with digital drive controllers in automated equipment. In service, the motor converts electrical commands into controlled rotary motion for positioning, indexing, and speed-regulated axis movement. Because it is a synchronous servo motor, it is suited to applications that need responsive torque delivery, repeatable acceleration, and stable running over repeated cycles. That makes it appropriate for packaging, handling, and general automation machinery.

The motor has a nominal speed of 3000 rpm, allowing continuous operation at a high rotational rate for many machine axes. A rear-mounted blocking brake supplies 22 Nm of holding torque, which helps keep vertical or suspended loads at rest when the drive is disabled. The centering pilot measures 110 mm, helping the housing seat accurately on the machine interface. The rotor uses the factory's Standard balancing grade to reduce residual vibration during normal operation. The frame has a stator diameter of 093 and a length code of C, which place it within the corresponding mechanical envelope of the MDD range.

Feedback is provided through Digital servo feedback (DSF), giving the controller position and speed data through an integrated encoder channel. This feedback path allows the drive to monitor rotor movement continuously and correct motor operation as load conditions change. All power and signal conductors exit on Side A through a sealed circular connector, which can simplify cable routing when the motor is mounted in compact machine layouts. A factory-installed shaft seal helps protect the output end from coolant splash and dust. The motor uses a plain output shaft, making it suitable for clamping hubs or shrink-disc couplings, and the shaft is provided only on the drive end.