Product Description:

The MDD093C-N-030-N2L-110GA1 is an AC synchronous motor engineered by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts inverter current into accurately regulated shaft motion for coordinated position and speed loops in automated transfer lines, pick-and-place stations, and packaging equipment. Its permanent-magnet design and tight magnetic tolerances allow fast acceleration while supporting repeatable positioning in continuous-duty industrial environments. This motor type is commonly used where stable torque response and consistent feedback are needed during indexing, transfer, and synchronized motion tasks.

At its nominal operating speed of 3000 rpm, the rotor produces constant mechanical output that matches the frequency supplied by the drive. A blocking brake is integrated, and its static holding torque is rated at 11 Nm, allowing vertical or suspended loads to remain locked when power is removed. Position data returns to the controller through digital servo feedback (DSF), which provides high-resolution incremental and absolute signals for closed-loop regulation. Mechanical alignment during mounting is assisted by a centering diameter of 110 mm, and motor length code C identifies the housing length used for this unit. Connections exit on side A, which can simplify cable routing when the cabinet is located to the left of the axis.

Electrical and mechanical terminations follow series conventions. Power and feedback lead through a keyed connector that mates with Rexroth cabling sets, and torque is transferred by a plain shaft suited for clamped couplings or gearboxes. The motor includes a shaft seal to limit lubricant migration and help protect the internal bearings. A single standard shaft end on the drive side avoids overhung loads on side B, while the standard housing finish supports heat dissipation without added coatings. Standard dynamic balancing helps reduce residual vibration, and the 093 frame size maintains compatibility with existing MDD mounting fixtures.