MDD093C-N-030-N2L-110GA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911254536
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
34 Seconds
The Bosch Rexroth Indramat MDD093C-N-030-N2L-110GA0 is a motor for digital drive controllers from the MDD Synchronous Motors series. It features digital servo feedback, a nominal speed of 3000 rpm, and a plain shaft with a shaft seal. The motor has a centering diameter of 110 mm and uses a standard housing and connector type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-030-N2L-110GA0 is a synchronous servo motor from Bosch Rexroth Indramat in the MDD Synchronous Motors series. Used with digital drive controllers, it converts regulated electrical power into accurate rotary motion for automated machinery. Closed-loop control lets the motor respond quickly to command changes in positioning tables, pick-and-place axes, and other motion systems. This type of motor is suited to applications that require accurate starts, stops, and speed changes without losing synchronization with the drive controller. It can be used where repeatable axis motion is needed throughout long production cycles.
A centering shoulder of 110 mm aligns the housing with machine mounting surfaces and helps keep the shaft concentric with the driven load. The motor uses frame size 093, which places it in the corresponding stator diameter class for this series. This frame format gives the motor a practical balance between mounting compactness and usable torque output. Length code C gives the motor a longer active section, which supports higher continuous torque in the same mounting diameter. The longer active section also increases electromagnetic length without changing the centering shoulder dimension. Rated speed is 3000 rpm, so the connected drive should be set for that base operating speed. The rotor uses standard balancing, which is suitable for common industrial couplings and general machine duty.
Electrical and service connections are located on Side A, and the single connector groups the main interfaces into one plug-in connection. Keeping the connections on one side can simplify cable routing in compact machine layouts. Digital servo feedback supports position reporting to the controller, allowing the drive to monitor motor movement continuously during operation. The shaft is fitted with a shaft seal, which helps limit lubricant migration along the plain shaft, and side B has no shaft extension. The motor is supplied without a blocking brake, so any power-off holding function must be provided by the machine or drive system. The absence of an integrated brake also reduces mechanical complexity at the rear of the motor. An aluminum housing dissipates heat during operation and supports a compact overall motor layout.
Frequently Asked Questions about MDD093C-N-030-N2L-110GA0:
Q: Does the MDD093C-N-030-N2L-110GA0 have a holding brake?
A: The MDD093C-N-030-N2L-110GA0 is manufactured without a blocking brake.
Q: What type of motor feedback does the MDD093C-N-030-N2L-110GA0 provide?
A: This model features a digital servo feedback (DSF) system for motor feedback.
Q: What is the connection direction for the MDD093C-N-030-N2L-110GA0 motor?
A: The connection is oriented on Side A for this motor.
Q: What is the nominal speed of the MDD093C-N-030-N2L-110GA0?
A: This motor has a nominal speed of 3000 min⁻¹.
Q: Does the MDD093C-N-030-N2L-110GA0 include a shaft seal?
A: A shaft seal is included with the plain shaft for this unit.
