Product Description:

The MDD093C-N-020-N2M-130PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is used with digital drive controllers and converts commanded current into precise rotary motion for positioning or velocity-regulated axes in automated machinery. The motor is suited for applications that require repeatable motion, stable speed control, and accurate response during continuous production cycles. This makes it suitable for equipment such as packaging systems, handling units, and other closed-loop motion platforms.

The motor uses frame size 093 with length code C and has a 130 mm centering diameter for accurate alignment on geared or belt-driven mounts. Its rated operating point is a 2000 rpm nominal speed, which supports moderate-speed operation while maintaining full torque bandwidth. Field wiring is simplified by a right-side connection direction, so the power and feedback leads leave the housing from the same side and connect through an industrial connector. Position data is returned through digital servo feedback, allowing closed-loop control without extra interface hardware. Torque is transmitted through a keyway shaft, which helps prevent slip when couplings handle cyclic or reversing loads.

The rotor is produced with standard balancing, which helps keep vibration within normal limits when the motor is coupled to typical pulleys or gearwheels. An integrated multiturn absolute encoder retains position data through power interruptions, so the axis can restart without a homing routine. Contaminant ingress at the output journal is limited by a shaft seal, which helps retain lubrication and block splash water. The motor is supplied without a blocking brake, so static holding must be provided by drive torque or an external clamp. Connection hardware uses a circular industrial connector, the housing is standard cast aluminum, and the shaft is provided only on side A to keep the rear end free of added overhung mass.