Product Description:

The MDD093C-N-020-N2M-130PL2 synchronous motor is manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series for use with digital drive controllers in industrial automation. It converts commanded current into rotary motion for indexing tables, packaging axes, and transfer modules that require accurate speed and position control. Permanent-magnet excitation and electronic feedback allow stable closed-loop operation, so the motor can respond quickly to changing motion commands. This arrangement supports coordinated axis movement in automated equipment without adding unnecessary mechanical complexity.

A centering diameter of 130 mm helps align the motor housing with matching machine interfaces and gearbox registers. The rotor is balanced to the standard grade and operates at a nominal speed of 2000 rpm, which suits many general automation tasks that need steady rotary motion. A holding brake rated at 22 Nm is integrated to keep the shaft stationary when the axis is stopped. Power and feedback connections are arranged on the left side, which helps organize cable routing when the motor is installed in compact machine layouts. Position information is supplied by an integrated multi-turn absolute encoder, so the drive can retain position data across multiple revolutions and support precise low-speed control.

The motor is built in size 093 and uses a shaft seal to help limit the entry of dust or coolant at the output end. Closed-loop signals are carried through digital servo feedback (DSF), which gives the connected drive the feedback data needed for regulated motion. Torque is transmitted through a keyed shaft, and the keyway provides a secure mechanical connection for couplings or pulleys. The unit also uses a C-length housing, a standard connector interface, and a single-ended shaft design. These features make the motor suitable for installations that need dependable feedback, secure shaft coupling, and compact servo performance in continuous industrial service.